1. Introduction：

The main engine of this series of products adopts a split frame structure with pre-tightening of pull rod, and the four corners and eight sides of the slider are guided by long guide rails, which has strong anti-bias ability. Through the proprietary micro-motion control technology of die research and development, the accurate position and speed control accuracy of the slider can be ensured, and the long-term accuracy and rigidity of the equipment can be ensured. This series of hydraulic press is equipped with a 180-degree turnover device for the upper die, which is convenient for the upper die research and matching.

This hydraulic press can be equipped with servo motor and pump drive, which can save energy by more than 80% and reduce noise by 10-30 decibels.

2. Application:

·Mainly used for the research and maintenance of large molds.

3. Advantages:

·Equipped with the function of turning the upper die 180, which is convenient for maintaining the upper die.

·Electro-hydraulic servo system with high positioning accuracy and convenient adjustment.

·No pressure die alignment function, convenient die alignment.

·Micro-motion function, convenient for accurate adjustment of slider position.

·Fault diagnosis function

·Complete safety devices and safety control systems

4. Optional configuration:

·Servo drive, energy saving and noise reduction

·Mechanical positioning of slider